Export 10 results:
Sort by: Author Title Type [ Year  (Desc)]
Lau, N, Tymofyeyeva E, Fialko Y.  2018.  Variations in the long-term uplift rate due to the Altiplano-Puna magma body observed with Sentinel-1 interferometry. Earth and Planetary Science Letters. 491:43-47.   10.1016/j.epsl.2018.03.026   AbstractWebsite

We present new Interferometric Synthetic Aperture Radar (InSAR) observations of surface deformation in the Altiplano-Puna region (South America) where previous studies documented a broad uplift at an average rate of similar to 10 mm/yr. We use data from the Sentinel-1 satellite mission to produce high-resolution velocity maps and time series of surface displacements between years 2014-2017. The data reveal that the uplift has slowed down substantially compared to the 1992-2010 epoch and is characterized by short-term fluctuations on time scales of months to years. The observed variations in uplift rate may indicate a non-steady supply of melt and/or volatiles from the partially molten Altiplano-Puna Magma Body (APMB) into an incipient diapir forming in the roof of the APMB. (C) 2018 Elsevier B.V. All rights reserved.

Wang, K, Fialko Y.  2018.  Observations and modeling of coseismic and postseismic deformation due to the 2015 M-w 7.8 Gorkha (Nepal) earthquake. Journal of Geophysical Research-Solid Earth. 123:761-779.   10.1002/2017jb014620   AbstractWebsite

We use space geodetic data to investigate coseismic and postseismic deformation due to the 2015 M-w 7.8 Gorkha earthquake that occurred along the central Himalayan arc. Because the earthquake area is characterized by strong variations in surface relief and material properties, we developed finite element models that explicitly account for topography and 3-D elastic structure. We computed the line-of-sight displacement histories from three tracks of the Sentinel-1A/B Interferometric Synthetic Aperture Radar (InSAR) satellites, using persistent scatter method. InSAR observations reveal an uplift of up to approximate to 70mm over approximate to 20months after the main shock, concentrated primarily at the downdip edge of the ruptured asperity. GPS observations also show uplift, as well as southward movement in the epicentral area, qualitatively similar to the coseismic deformation pattern. Kinematic inversions of GPS and InSAR data and forward models of stress-driven creep suggest that the observed postseismic transient is dominated by afterslip on a downdip extension of the seismic rupture. A poroelastic rebound may have contributed to the observed uplift and southward motion, but the predicted surface displacements are small. We also tested a wide range of viscoelastic relaxation models, including 1-D and 3-D variations in the viscosity structure. Models of a low-viscosity channel previously invoked to explain the long-term uplift and variations in topography at the plateau margins predict opposite signs of horizontal and vertical displacements compared to those observed. Our results do not preclude a possibility of deep-seated viscoelastic response beneath southern Tibet with a characteristic relaxation time greater than the observation period (2years).

Wang, K, Xu XH, Fialko Y.  2017.  Improving Burst Alignment in TOPS Interferometry With Bivariate Enhanced Spectral Diversity. Ieee Geoscience and Remote Sensing Letters. 14:2423-2427.   10.1109/lgrs.2017.2767575   AbstractWebsite

Terrain observation by progressive scans (TOPS)mode synthetic aperture radar interferometry requires high accuracy of burst alignments. Geometrical burst alignment relying on precise orbits and digital topography is not always sufficient for Sentinel-1A TOPS-mode interferometry. Enhanced spectral diversity (ESD) method was proposed to estimate a constant azimuth shift between radar images that minimizes phase discontinuities across the bursts. In some cases, however, the ESD refinement fails to align the bursts in Sentinel-1 interferograms, possibly because of ionospheric propagation effects. Here, we show that in such cases, a bivariate shift (that depends on both azimuth and range) can efficiently remove phase discontinuities across the bursts. The bivariate shift can be derived from the double-differenced radar phase in the burst overlap regions.

Samsonov, SV, Feng WP, Fialko Y.  2017.  Subsidence at Cerro Prieto Geothermal Field and postseismic slip along the Indiviso fault from 2011 to 2016 RADARSAT-2 DInSAR time series analysis. Geophysical Research Letters. 44:2716-2724.   10.1002/2017gl072690   AbstractWebsite

We present RADARSAT-2 Differential Interferometric Synthetic Aperture Radar (DInSAR) observations of deformation due to fluid extraction at the Cerro Prieto Geothermal Field (CPGF) and afterslip on the 2010 M7.2 El Mayor-Cucapah (EMC) earthquake rupture during 2011-2016. Advanced multidimensional time series analysis reveals subsidence at the CPGF with the maximum rate greater than 100mm/yr accompanied by horizontal motion (radial contraction) at a rate greater than 30mm/yr. During the same time period, more than 30mm of surface creep occurred on the Indiviso fault ruptured by the EMC earthquake. We performed inversions of DInSAR data to estimate the rate of volume changes at depth due to the geothermal production at the CPGF and the distribution of afterslip on the Indiviso fault. The maximum coseismic slip due to the EMC earthquake correlates with the Coulomb stress changes on the Indiviso fault due to fluid extraction at the CPGF. Afterslip occurs on the periphery of maximum coseismic slip areas. Time series analysis indicates that afterslip still occurs 6years after the earthquake.

Kaneko, Y, Fialko Y, Sandwell DT, Tong X, Furuya M.  2013.  Interseismic deformation and creep along the central section of the North Anatolian Fault (Turkey): InSAR observations and implications for rate-and-state friction properties. Journal of Geophysical Research-Solid Earth. 118:316-331.   10.1029/2012jb009661   AbstractWebsite

We present high-resolution measurements of interseismic deformation along the central section of the North Anatolian Fault (NAF) in Turkey using interferometric synthetic aperture radar data from the Advanced Land Observing Satellite and Envisat missions. We generated maps of satellite line-of-sight velocity using five ascending Advanced Land Observing Satellite tracks and one descending Envisat track covering the NAF between 31.2 degrees E and 34.3 degrees E. The line-of-sight velocity reveals discontinuities of up to similar to 5 mm/yr across the Ismetpasa segment of the NAF, implying surface creep at a rate of similar to 9 mm/yr; this is a large fraction of the inferred slip rate of the NAF (21-25 mm/yr). The lateral extent of significant surface creep is about 75 km. We model the inferred surface velocity and shallow fault creep using numerical simulations of spontaneous earthquake sequences that incorporate laboratory-derived rate and state friction. Our results indicate that frictional behavior in the Ismetpasa segment is velocity strengthening at shallow depths and transitions to velocity weakening at a depth of 3-6 km. The inferred depth extent of shallow fault creep is 5.5-7 km, suggesting that the deeper locked portion of the partially creeping segment is characterized by a higher stressing rate, smaller events, and shorter recurrence interval. We also reproduce surface velocity in a locked segment of the NAF by fault models with velocity-weakening conditions at shallow depth. Our results imply that frictional behavior in a shallow portion of major active faults with little or no shallow creep is mostly velocity weakening. Citation: Kaneko, Y., Y. Fialko, D. T. Sandwell, X. Tong, and M. Furuya (2013), Interseismic deformation and creep along the central section of the North Anatolian Fault (Turkey): InSAR observations and implications for rate-and-state friction properties, J. Geophys. Res. Solid Earth, 118, 316-331, doi: 10.1029/2012JB009661.

Lindsey, EO, Fialko Y.  2013.  Geodetic slip rates in the southern San Andreas Fault system: Effects of elastic heterogeneity and fault geometry. Journal of Geophysical Research-Solid Earth. 118:689-697.   10.1029/2012jb009358   AbstractWebsite

We use high resolution interferometric synthetic aperture radar and GPS measurements of crustal motion across the southern San Andreas Fault system to investigate the effects of elastic heterogeneity and fault geometry on inferred slip rates and locking depths. Geodetically measured strain rates are asymmetric with respect to the mapped traces of both the southern San Andreas and San Jacinto faults. Two possibilities have been proposed to explain this observation: large contrasts in crustal rigidity across the faults, or an alternate fault geometry such as a dipping San Andreas fault or a blind segment of the San Jacinto Fault. We evaluate these possibilities using a two-dimensional elastic model accounting for heterogeneous structure computed from the Southern California Earthquake Center crustal velocity model CVM-H 6.3. The results demonstrate that moderate variations in elastic properties of the crust do not produce a significant strain rate asymmetry and have only a minor effect on the inferred slip rates. However, we find that small changes in the location of faults at depth can strongly impact the results. Our preferred model includes a San Andreas Fault dipping northeast at 60 degrees, and two active branches of the San Jacinto fault zone. In this case, we infer nearly equal slip rates of 18 +/- 1 and 19 +/- 2 mm/yr for the San Andreas and San Jacinto fault zones, respectively. These values are in good agreement with geologic measurements representing average slip rates over the last 10(4)-10(6) years, implying steady long-term motion on these faults. Citation: Lindsey, E. O., and Y. Fialko (2013), Geodetic slip rates in the southern San Andreas Fault system: Effects of elastic heterogeneity and fault geometry, J. Geophys. Res. Solid Earth, 118, 689-697, doi:10.1029/2012JB009358.

Barbot, S, Fialko Y.  2010.  A unified continuum representation of post-seismic relaxation mechanisms: semi-analytic models of afterslip, poroelastic rebound and viscoelastic flow. Geophysical Journal International. 182:1124-1140.   10.1111/j.1365-246X.2010.04678.x   AbstractWebsite

P>We present a unified continuum mechanics representation of the mechanisms believed to be commonly involved in post-seismic transients such as viscoelasticity, fault creep and poroelasticity. The time-dependent relaxation that follows an earthquake, or any other static stress perturbation, is considered in a framework of a generalized viscoelastoplastic rheology whereby some inelastic strain relaxes a physical quantity in the material. The relaxed quantity is the deviatoric stress in case of viscoelastic relaxation, the shear stress in case of creep on a fault plane and the trace of the stress tensor in case of poroelastic rebound. In this framework, the instantaneous velocity field satisfies the linear inhomogeneous Navier's equation with sources parametrized as equivalent body forces and surface tractions. We evaluate the velocity field using the Fourier-domain Green's function for an elastic half-space with surface buoyancy boundary condition. The accuracy of the proposed method is demonstrated by comparisons with finite-element simulations of viscoelastic relaxation following strike-slip and dip-slip ruptures for linear and power-law rheologies. We also present comparisons with analytic solutions for afterslip driven by coseismic stress changes. Finally, we demonstrate that the proposed method can be used to model time-dependent poroelastic rebound by adopting a viscoelastic rheology with bulk viscosity and work hardening. The proposed method allows one to model post-seismic transients that involve multiple mechanisms (afterslip, poroelastic rebound, ductile flow) with an account for the effects of gravity, non-linear rheologies and arbitrary spatial variations in inelastic properties of rocks (e.g. the effective viscosity, rate-and-state frictional parameters and poroelastic properties).

Hamiel, Y, Katz O, Lyakhovsky V, Reches Z, Fialko Y.  2006.  Stable and unstable damage evolution in rocks with implications to fracturing of granite. Geophysical Journal International. 167:1005-1016.   10.1111/j.1365-246X.2006.03126.x   AbstractWebsite

We address the relation between the rock rigidity and crack density by comparing predictions of a viscoelastic damage rheology model to laboratory data that include direct microscopic mapping of cracks. The damage rheology provides a generalization of Hookean elasticity to a non-linear continuum mechanics framework incorporating degradation and recovery of the effective elastic properties, transition from stable to unstable fracturing, and gradual accumulation of irreversible deformation. This approach is based on the assumption that the density of microcracks is uniform over a length scale much larger than the length of a typical crack, yet much smaller than the size of the entire deforming domain. For a system with a sufficiently large number of cracks, one can define a representative volume in which the crack density is uniform and introduce an intensive damage variable for this volume. We tested our viscoelastic damage rheology against sets of laboratory experiments done on Mount Scott granite. Based on fitting the entire stress-strain records the damage variable is constrained, and found to be a linear function of the crack density. An advantage of these sets experiments is that they were preformed with different loading paths and explicitly demonstrated the existence of stable and unstable fracturing regimes. We demonstrate that the viscoelastic damage rheology provides an adequate quantitative description of the brittle rock deformation and simulates both the stable and unstable damage evolution under various loading conditions. Comparison between the presented data analysis of experiments with Mount Scott granite and previous results with Westerly granite and Berea sandstone indicates that granular or porous rocks have lower seismic coupling. This implies that the portion of elastic strain released during a seismic cycle as brittle deformation depends on the lithology of the region. Hence, upper crustal regions with thick sedimentary cover, or fault zones with high degree of damage are expected to undergo a more significant inelastic deformation in the interseismic period compared to 'intact' crystalline rocks.

Fialko, Y, Rivera L, Kanamori H.  2005.  Estimate of differential stress in the upper crust from variations in topography and strike along the San Andreas fault. Geophysical Journal International. 160:527-532.   10.1111/j.1365-246X.2004.02511.x   AbstractWebsite

The major bends of the San Andreas fault in California are associated with significant variations in the along-fault topography. The topography-induced perturbations in the intermediate principal stress may result in the rotation of the fault with respect to the maximum compression axis provided that the fault is non-vertical, and the slip is horizontal. The progressive fault rotation may produce additional topography via thrust faulting in the adjacent crust, resulting in a positive feedback. The observed rotation of the fault plane due to the along-fault variations in topography is used to infer the magnitude of the in situ differential stress. Our results suggest that the average differential stress in the upper crust around the San Andreas fault is of the order of 50 MPa, implying that the effective fault strength is about a factor of two lower than predictions based on Byerlee's law and the assumption of hydrostatic pore pressure.

Fialko, Y.  2004.  Probing the mechanical properties of seismically active crust with space geodesy: Study of the coseismic deformation due to the 1992 M(w)7.3 Landers (southern California) earthquake. Journal of Geophysical Research-Solid Earth. 109   10.1029/2003jb002756   AbstractWebsite

[1] The coseismic deformation due to the 1992 M(w)7.3 Landers earthquake, southern California, is investigated using synthetic aperture radar (SAR) and Global Positioning System (GPS) measurements. The ERS-1 satellite data from the ascending and descending orbits are used to generate contiguous maps of three orthogonal components ( east, north, up) of the coseismic surface displacement field. The coseismic displacement field exhibits symmetries with respect to the rupture plane that are suggestive of a linear relationship between stress and strain in the crust. Interferometric synthetic aperture radar (InSAR) data show small-scale deformation on nearby faults of the Eastern California Shear Zone. Some of these faults ( in particular, the Calico, Rodman, and Pinto Mountain faults) were also subsequently strained by the 1999 M(w)7.1 Hector Mine earthquake. I test the hypothesis that the anomalous fault strain represents essentially an elastic response of kilometer-scale compliant fault zones to stressing by nearby earthquakes [Fialko et al., 2002]. The coseismic stress perturbations due to the Landers earthquake are computed using a slip model derived from inversions of the InSAR and GPS data. Calculations are performed for both homogeneous and transversely isotropic half-space models. The compliant zone model that best explains the deformation on the Calico and Pinto Mountain faults due to the Hector Mine earthquake successfully predicts the coseismic displacements on these faults induced by the Landers earthquake. Deformation on the Calico and Pinto Mountain faults implies about a factor of 2 reduction in the effective shear modulus within the similar to 2 km wide fault zones. The depth extent of the low-rigidity zones is poorly constrained but is likely in excess of a few kilometers. The same type of structure is able to explain high gradients in the radar line of sight displacements observed on other faults adjacent to the Landers rupture. In particular, the Lenwood fault north of the Soggy Lake has likely experienced a few centimeters of left-lateral motion across < 1-km-wide compliant fault zone having the rigidity reduction of more than a factor of 2. The inferred compliant fault zones are interpreted to be a result of extensive damage due to past earthquakes.