Export 7 results:
Sort by: Author Title Type [ Year  (Desc)]
Tymofyeyeva, E, Fialko Y.  2018.  Geodetic evidence for a blind fault segment at the southern end of the San Jacinto Fault Zone. Journal of Geophysical Research-Solid Earth. 123:878-891.   10.1002/2017jb014477   AbstractWebsite

The San Jacinto Fault (SJF) splits into several active branches southeast of Anza, including the Clark fault and the Coyote Creek fault. The Clark fault, originally believed to terminate at the southern tip of the Santa Rosa Mountains, was suggested to extend further to the southeast to a junction with the Superstition Hills fault based on space geodetic observations and geologic mapping. We present new interferometric synthetic aperture radar and GPS data that confirm high deformation rates along the southeastern extent of the Clark fault. We derive maps of horizontal and vertical average velocities by combining data from the ascending and descending satellite orbits with an additional constraint provided by the azimuth of the horizontal component of secular velocities from GPS data. The resulting high-resolution surface velocities are differentiated to obtain a map of maximum shear strain rate. Joint inversions of InSAR and GPS data suggest that the hypothesized blind segment of the Clark fault and the Coyote Creek fault have slip rates of 13 3mm/yr and 5 4mm/yr, respectively. The blind southern segment of the Clark fault thus appears to be the main active strand of the SJF, posing a currently unrecognized seismic hazard.

Wang, K, Fialko Y.  2018.  Observations and modeling of coseismic and postseismic deformation due to the 2015 M-w 7.8 Gorkha (Nepal) earthquake. Journal of Geophysical Research-Solid Earth. 123:761-779.   10.1002/2017jb014620   AbstractWebsite

We use space geodetic data to investigate coseismic and postseismic deformation due to the 2015 M-w 7.8 Gorkha earthquake that occurred along the central Himalayan arc. Because the earthquake area is characterized by strong variations in surface relief and material properties, we developed finite element models that explicitly account for topography and 3-D elastic structure. We computed the line-of-sight displacement histories from three tracks of the Sentinel-1A/B Interferometric Synthetic Aperture Radar (InSAR) satellites, using persistent scatter method. InSAR observations reveal an uplift of up to approximate to 70mm over approximate to 20months after the main shock, concentrated primarily at the downdip edge of the ruptured asperity. GPS observations also show uplift, as well as southward movement in the epicentral area, qualitatively similar to the coseismic deformation pattern. Kinematic inversions of GPS and InSAR data and forward models of stress-driven creep suggest that the observed postseismic transient is dominated by afterslip on a downdip extension of the seismic rupture. A poroelastic rebound may have contributed to the observed uplift and southward motion, but the predicted surface displacements are small. We also tested a wide range of viscoelastic relaxation models, including 1-D and 3-D variations in the viscosity structure. Models of a low-viscosity channel previously invoked to explain the long-term uplift and variations in topography at the plateau margins predict opposite signs of horizontal and vertical displacements compared to those observed. Our results do not preclude a possibility of deep-seated viscoelastic response beneath southern Tibet with a characteristic relaxation time greater than the observation period (2years).

Samsonov, SV, Feng WP, Fialko Y.  2017.  Subsidence at Cerro Prieto Geothermal Field and postseismic slip along the Indiviso fault from 2011 to 2016 RADARSAT-2 DInSAR time series analysis. Geophysical Research Letters. 44:2716-2724.   10.1002/2017gl072690   AbstractWebsite

We present RADARSAT-2 Differential Interferometric Synthetic Aperture Radar (DInSAR) observations of deformation due to fluid extraction at the Cerro Prieto Geothermal Field (CPGF) and afterslip on the 2010 M7.2 El Mayor-Cucapah (EMC) earthquake rupture during 2011-2016. Advanced multidimensional time series analysis reveals subsidence at the CPGF with the maximum rate greater than 100mm/yr accompanied by horizontal motion (radial contraction) at a rate greater than 30mm/yr. During the same time period, more than 30mm of surface creep occurred on the Indiviso fault ruptured by the EMC earthquake. We performed inversions of DInSAR data to estimate the rate of volume changes at depth due to the geothermal production at the CPGF and the distribution of afterslip on the Indiviso fault. The maximum coseismic slip due to the EMC earthquake correlates with the Coulomb stress changes on the Indiviso fault due to fluid extraction at the CPGF. Afterslip occurs on the periphery of maximum coseismic slip areas. Time series analysis indicates that afterslip still occurs 6years after the earthquake.

Wang, K, Fialko Y.  2015.  Slip model of the 2015 M-w 7.8 Gorkha (Nepal) earthquake from inversions of ALOS-2 and GPS data. Geophysical Research Letters. 42:7452-7458.   10.1002/2015gl065201   AbstractWebsite

We use surface deformation measurements including Interferometric Synthetic Aperture Radar data acquired by the ALOS-2 mission of the Japanese Aerospace Exploration Agency and Global Positioning System (GPS) data to invert for the fault geometry and coseismic slip distribution of the 2015 M-w 7.8 Gorkha earthquake in Nepal. Assuming that the ruptured fault connects to the surface trace of the Main Frontal Thrust (MFT) fault between 84.34 degrees E and 86.19 degrees E, the best fitting model suggests a dip angle of 7 degrees. The moment calculated from the slip model is 6.08 x 10(20)Nm, corresponding to the moment magnitude of 7.79. The rupture of the 2015 Gorkha earthquake was dominated by thrust motion that was primarily concentrated in a 150km long zone 50 to 100km northward from the surface trace of the Main Frontal Thrust (MFT), with maximum slip of approximate to 5.8m at a depth of approximate to 8km. Data thus indicate that the 2015 Gorkha earthquake ruptured a deep part of the seismogenic zone, in contrast to the 1934 Bihar-Nepal earthquake, which had ruptured a shallow part of the adjacent fault segment to the east.

Tymofyeyeva, E, Fialko Y.  2015.  Mitigation of atmospheric phase delays in InSAR data, with application to the eastern California shear zone. Journal of Geophysical Research-Solid Earth. 120:5952-5963.   10.1002/2015jb011886   AbstractWebsite

We present a method for estimating radar phase delays due to propagation through the troposphere and the ionosphere based on the averaging of redundant interferograms that share a common scene. Estimated atmospheric contributions can then be subtracted from the radar interferograms to improve measurements of surface deformation. Inversions using synthetic data demonstrate that this procedure can considerably reduce scatter in the time series of the line-of-sight displacements. We demonstrate the feasibility of this method by comparing the interferometric synthetic aperture radar (InSAR) time series derived from ERS-1/2 and Envisat data to continuous Global Positioning System data from eastern California. We also present results from several sites in the eastern California shear zone where anomalous deformation has been reported by previous studies, including the Blackwater fault, the Hunter Mountain fault, and the Coso geothermal plant.

Fialko, Y, Khazan Y, Simons M.  2001.  Deformation due to a pressurized horizontal circular crack in an elastic half-space, with applications to volcano geodesy. Geophysical Journal International. 146:181-190.   10.1046/j.1365-246X.2001.00452.x   AbstractWebsite

We consider deformation due to sill-like magma intrusions using a model of a horizontal circular crack in a semi-infinite elastic solid. We present exact expressions for vertical and horizontal displacements of the free surface of a half-space, and calculate surface displacements for a special case of a uniformly pressurized crack. We derive expressions for other observable geophysical parameters, such as the volume of a surface uplift/subsidence, and the corresponding volume change due to fluid injection/withdrawal at depth. We demonstrate that for essentially oblate (i.e. sill-like) source geometries the volume change at the source always equals the volume of the displaced material at the surface of a half-space. Our solutions compare favourably to a number of previously published approximate models. Surface deformation due to a 'point' crack (that is, a crack with a large depth-to-radius ratio) differs appreciably from that due to an isotropic point source ('Mogi model'). Geodetic inversions that employ only one component of deformation (either vertical or horizontal) are unlikely to resolve the overall geometry of subsurface deformation sources even in a simplest case of axisymmetric deformation. Measurements of a complete vector displacement field at the Earth's surface may help to constrain the depth and morphology of active magma reservoirs. However, our results indicate that differences in surface displacements due to various axisymmetric sources may be subtle. In particular, the sill-like and pluton-like magma chambers may give rise to differences in the ratio of maximum horizontal displacements to maximum vertical displacements (a parameter that is most indicative of the source geometry) that are less than 30 per cent. Given measurement errors in geodetic data, such differences may be hard to distinguish.

Fialko, Y, Simons M, Khazan Y.  2001.  Finite source modelling of magmatic unrest in Socorro, New Mexico, and Long Valley, California. Geophysical Journal International. 146:191-200.   10.1046/j.1365-246X.2001.00453.x   AbstractWebsite

We investigate surface deformation associated with currently active crustal magma bodies in Socorro, New Mexico, and Long Valley, California, USA. We invert available geodetic data from these locations to constrain the overall geometry and dynamics of the inferred deformation sources at depth. Our brst-fitting model for the Socorro magma body is a sill with a depth of 19 km, an effective diameter of 70 km and a rate of increase in the excess magma pressure of 0.6 kPa yr(-1). We show that the corresponding volumetric inflation rate is similar to6 x 10(-3) km(3) yr(-1), which is considerably less than previously suggested. The measured inflation rate of the Socorro magma body may result from a steady influx of magma from a deep source, or a volume increase associated with melting of the magma chamber roof (i.e. crustal anatexis). In the latter case, the most recent major injection of mantle-derived melts into the middle crust beneath Socorro map have occurred within the last several tens to several hundreds of years. The Synthetic Interferometric Aperture Radar (InSAR) data collected in the area of the Long Valley caldera, CA, between June 1996 and July 1998 reveal an intracaldera uplift with a maximum amplitude of similar to 11 cm and a volume of 3.5 x 10(-2) km(3). Modelling of the InSAR data suggests that the observed deformation might be due to either a sill-like magma body at a depth of similar to 12 km or a pluton-like magma body at a depth of similar to8 km beneath the resurgent dome. Assuming that the caldera fill deforms as an isotropic linear elastic solid, a joint inversion of the InSAR data and two-colons laser geodimeter data (which provide independent constraints on horizontal displacements at the surface) suggests that the inferred magma chamber is a steeply dipping prolate spheroid with a depth of 7-9 km and an aspect ratio in excess of 2:1. Our results highlight the need for large radar look angles and multiple look directions in future InSAR missions.