Publications

Export 27 results:
Sort by: Author [ Title  (Asc)] Type Year
A B C D E F G H I J K [L] M N O P Q R S T U V W X Y Z   [Show ALL]
2
Tong, XP, Sandwell D, Luttrell K, Brooks B, Bevis M, Shimada M, Foster J, Smalley R, Parra H, Soto JCB, Blanco M, Kendrick E, Genrich J, Caccamise DJ.  2010.  The 2010 Maule, Chile earthquake: Downdip rupture limit revealed by space geodesy. Geophysical Research Letters. 37   10.1029/2010gl045805   AbstractWebsite

Radar interferometry from the ALOS satellite captured the coseismic ground deformation associated with the 2010 Mw 8.8 Maule, Chile earthquake. The ALOS interferograms reveal a sharp transition in fringe pattern at similar to 150 km from the trench axis that is diagnostic of the downdip rupture limit of the Maule earthquake. An elastic dislocation model based on ascending and descending ALOS interferograms and 13 near-field 3-component GPS measurements reveals that the coseismic slip decreases more or less linearly from a maximum of 17 m (along-strike average of 6.5 m) at 18 km depth to near zero at 43-48 km depth, quantitatively indicating the downdip limit of the seismogenic zone. The depth at which slip drops to near zero appears to be at the intersection of the subducting plate with the continental Moho. Our model also suggests that the depth where coseismic slip vanishes is nearly uniform along the strike direction for a rupture length of similar to 600 km. The average coseismic slip vector and the interseismic velocity vector are not parallel, which can be interpreted as a deficit in strike-slip moment release. Citation: Tong, X., et al. (2010), The 2010 Maule, Chile earthquake: Downdip rupture limit revealed by space geodesy, Geophys. Res. Lett., 37, L24311, doi:10.1029/2010GL045805.

A
Sandwell, DT, Lawver LA, Dalziel IWD, Smith WHF, Wiederspahn M.  1992.  ANTARCTICA Gravity Anomaly and Infrared Satellite Image, USGS MAP 1-2284. : U.S. Geol. Survey Abstract
n/a
C
Luttrell, K, Sandwell D.  2012.  Constraints on 3-D stress in the crust from support of mid-ocean ridge topography. Journal of Geophysical Research-Solid Earth. 117   10.1029/2011jb008765   AbstractWebsite

The direction of crustal stresses acting at mid-ocean ridges is well characterized, but the magnitude of these stresses is poorly constrained. We present a method by which the absolute magnitude of these stresses may be constrained using seafloor topography and gravity. The topography is divided into a short-wavelength portion, created by rifting, magmatism, and transform faulting, and a long-wavelength portion associated with the cooling and subsidence of the oceanic lithosphere. The short-wavelength surface and Moho topography are used to calculate the spatially varying 3-D stress tensor in the crust by assuming that in creating this topography, the deviatoric stress reached the elastic-plastic limiting stress; the Moho topography is constrained by short-wavelength gravity variations. Under these assumptions, an incompressible elastic material gives the smallest plastic failure stress associated with this topography. This short-wavelength topographic stress generally predicts the wrong style of earthquake focal mechanisms at ridges and transform faults. However, the addition of an in-plane regional stress field is able to reconcile the combined crustal stress with both the ridge and transform focal mechanisms. By adjusting the magnitude of the regional stress, we determine a lower bound for in situ ridge-perpendicular extension of 25-40 MPa along the slow spreading mid-Atlantic ridge, 40-50 MPa along the ultra-slow spreading ridges in the western Indian Ocean, and 10-30 MPa along the fast spreading ridges of the southeastern Indian and Pacific Oceans. Furthermore, we constrain the magnitude of ridge-parallel extension to be between 4 and 8 MPa in the Atlantic Ocean, between -1 and 7 MPa in the western Indian Ocean, and between -1 and 3 MPa in the southeastern Indian and Pacific Oceans. These observations suggest that a deep transform valley is an essential feature of the ridge-transform spreading center.

Lyons, SN, Bock Y, Sandwell DT.  2002.  Creep along the imperial fault, southern California, from GPS measurements. Journal of Geophysical Research-Solid Earth. 107   10.1029/2001jb000763   AbstractWebsite

[1] In May of 1999 and 2000, we surveyed with Global Positioning System (GPS) 46 geodetic monuments established by Imperial College, London, in a dense grid (half-mile spacing) along the Imperial Fault, with three additional National Geodetic Survey sites serving as base stations. These stations were previously surveyed in 1991 and 1993. The Imperial College sites were surveyed in rapid-static mode (15-20 min occupations), while the NGS sites continuously received data for 10 h d(-1). Site locations were calculated using the method of instantaneous positioning, and velocities were determined relative to one of the NGS base stations. Combining our results with far-field velocities from the Southern California Earthquake Center (SCEC), we fit the data to a simple elastic dislocation model with 35 mm yr(-1) of right-lateral slip below 10 km and 9 mm yr(-1) of creep from the surface down to 3 km. The velocity field is asymmetrical across the fault and could indicate a dipping fault plane to the northeast or a viscosity contrast across the fault.

E
Neves, MC, Cabral J, Luttrell K, Figueiredo P, Rockwell T, Sandwell D.  2015.  The effect of sea level changes on fault reactivation potential in Portugal. Tectonophysics. 658:206-220.   10.1016/j.tecto.2015.07.023   AbstractWebsite

The aim of this study is to assess the impact of sea level changes on both the stress field and the potential of fault reactivation in west Iberia. The analysis is applied to a set of five active faults distributed across Portugal, selected for representing predominant fault directions and for being seismically active. The results show that the rise of sea level since the Last Glacial Maximum has produced flexural effects with distinct impacts on different faults. The Coulomb stress changes induced by the sea level rise along the S. Marcos-Quarteira (south Portugal) and the Horseshoe (offshore SW Iberia) faults are found to be extremely small, independently of the elastic plate thickness. These faults are thus unaffected by flexural effects related to ocean loading, and are unlikely to possess any paleoseismic record of this phenomenon. In contrast, the eustatic sea level rise during the late Pleistocene could have raised the Coulomb stress by 0.5-1 MPa along the Manteigas-Vilarica-Braganca (north Portugal) and Lower Tagus Valley (Lisbon area) fault systems. Such stress perturbations are probably sufficient to impact the seismic cycle of the Manteigas-Vilarica-Braganca fault, bringing it closer to failure and possibly triggering the earthquake clusters that have been observed in previous paleoseismologic studies. (C) 2015 Elsevier B.V. All rights reserved.

Gonzalez-Ortega, A, Fialko Y, Sandwell D, Nava-Pichardo FA, Fletcher J, Gonzalez-Garcia J, Lipovsky B, Floyd M, Funning G.  2014.  El Mayor-Cucapah ( M-w 7.2) earthquake: Early near-field postseismic deformation from InSAR and GPS observations. Journal of Geophysical Research-Solid Earth. 119:1482-1497.   10.1002/2013jb010193   AbstractWebsite

El Mayor-Cucapah earthquake occurred on 4 April 2010 in northeastern Baja California just south of the U.S.-Mexico border. The earthquake ruptured several previously mapped faults, as well as some unidentified ones, including the Pescadores, Borrego, Paso Inferior and Paso Superior faults in the Sierra Cucapah, and the Indiviso fault in the Mexicali Valley and Colorado River Delta. We conducted several Global Positioning System (GPS) campaign surveys of preexisting and newly established benchmarks within 30km of the earthquake rupture. Most of the benchmarks were occupied within days after the earthquake, allowing us to capture the very early postseismic transient motions. The GPS data show postseismic displacements in the same direction as the coseismic displacements; time series indicate a gradual decay in postseismic velocities with characteristic time scales of 669days and 203days, assuming exponential and logarithmic decay, respectively. We also analyzed interferometric synthetic aperture radar (InSAR) data from the Envisat and ALOS satellites. The main deformation features seen in the line-of-sight displacement maps indicate subsidence concentrated in the southern and northern parts of the main rupture, in particular at the Indiviso fault, at the Laguna Salada basin, and at the Paso Superior fault. We show that the near-field GPS and InSAR observations over a time period of 5months after the earthquake can be explained by a combination of afterslip, fault zone contraction, and a possible minor contribution of poroelastic rebound. Far-field data require an additional mechanism, most likely viscoelastic relaxation in the ductile substrate.

Luttrell, KM, Tong XP, Sandwell DT, Brooks BA, Bevis MG.  2011.  Estimates of stress drop and crustal tectonic stress from the 27 February 2010 Maule, Chile, earthquake: Implications for fault strength. Journal of Geophysical Research-Solid Earth. 116   10.1029/2011jb008509   AbstractWebsite

The great 27 February 2010 M(w) 8.8 earthquake off the coast of southern Chile ruptured a similar to 600 km length of subduction zone. In this paper, we make two independent estimates of shear stress in the crust in the region of the Chile earthquake. First, we use a coseismic slip model constrained by geodetic observations from interferometric synthetic aperture radar (InSAR) and GPS to derive a spatially variable estimate of the change in static shear stress along the ruptured fault. Second, we use a static force balance model to constrain the crustal shear stress required to simultaneously support observed fore-arc topography and the stress orientation indicated by the earthquake focal mechanism. This includes the derivation of a semianalytic solution for the stress field exerted by surface and Moho topography loading the crust. We find that the deviatoric stress exerted by topography is minimized in the limit when the crust is considered an incompressible elastic solid, with a Poisson ratio of 0.5, and is independent of Young's modulus. This places a strict lower bound on the critical stress state maintained by the crust supporting plastically deformed accretionary wedge topography. We estimate the coseismic shear stress change from the Maule event ranged from -6 MPa (stress increase) to 17 MPa (stress drop), with a maximum depth-averaged crustal shear-stress drop of 4 MPa. We separately estimate that the plate-driving forces acting in the region, regardless of their exact mechanism, must contribute at least 27 MPa trench-perpendicular compression and 15 MPa trench-parallel compression. This corresponds to a depth-averaged shear stress of at least 7 MPa. The comparable magnitude of these two independent shear stress estimates is consistent with the interpretation that the section of the megathrust fault ruptured in the Maule earthquake is weak, with the seismic cycle relieving much of the total sustained shear stress in the crust.

Sandwell, DT, Winterer EL, Mammerickx J, Duncan RA, Lynch MA, Levitt DA, Johnson CL.  1995.  Evidence for Diffuse Extension of the Pacific Plate from Pukapuka Ridges and Cross-Grain Gravity Lineations. Journal of Geophysical Research-Solid Earth. 100:15087-15099.   10.1029/95jb00156   AbstractWebsite

Satellite altimeter measurements of marine gravity reveal 100 to 200-km wavelength lineations over a wide area of the Pacific plate oriented roughly in the direction of absolute plate motion. At least three mechanisms have been proposed for their origin: small-scale convective rolls aligned in the direction of absolute plate motion by shear in the asthenosphere; diffuse N-S extension of the lithosphere resulting in lineated zones of extension (boudins); and minihotspots that move slowly with respect to major hotspots and produce intermittent volcanism. Recently, several chains of linear volcanic ridges have been found to be associated with the gravity lineations. Following ridgelike gravity signatures apparent in high-resolution Geosat gravity measurements, we surveyed a series of volcanic ridges that extend northwest from the East Pacific Rise flank for 2600 km onto 40 Ma seafloor. Our survey data, as well as radiometric dates on samples we collected from the ridges, provide tight constraints on their origin: (1) Individual ridge segments and sets of ridges are highly elongate in the direction of present absolute plate motion. (2) The ridges formed along a band 50 to 70-km-wide in the trough of one of the more prominent gravity lineations. (3) Radiometric dates of the largest ridges show no hotspot age progression. Moreover, the directions predicted for minihotspot traces older than 24 Ma do not match observed directions of either the gravity lineations or the ridges. Based on this last observation, we reject the minihotspot model. The occurrence of the ridges in the trough of the gravity lineation is incompatible with the small-scale convection model which would predict increased volcanism above the convective upwelling. We favor the diffuse extension model because it is consistent with the occurrence of ridges in the trough above the more highly extended lithosphere. However, the multibeam data show no evidence for widespread normal faulting of the crust as predicted by the model. Perhaps the fault scarps are buried under more than 30 m of sediments and/or covered by the elongated ridges. Finally, we note that if ridge-push force is much smaller than trench-pull force, then near the ridge axis the direction of maximum tensile stress must be perpendicular to the direction of absolute plate motion.

F
Lyons, S, Sandwell D.  2003.  Fault creep along the southern San Andreas from interferometric synthetic aperture radar, permanent scatterers, and stacking. Journal of Geophysical Research-Solid Earth. 108   10.1029/2002jb001831   AbstractWebsite

[1] Interferometric synthetic aperture radar (InSAR) provides a practical means of mapping creep along major strike-slip faults. The small amplitude of the creep signal (<10 mm/yr), combined with its short wavelength, makes it difficult to extract from long time span interferograms, especially in agricultural or heavily vegetated areas. We utilize two approaches to extract the fault creep signal from 37 ERS SAR images along the southern San Andreas Fault. First, amplitude stacking is utilized to identify permanent scatterers, which are then used to weight the interferogram prior to spatial filtering. This weighting improves correlation and also provides a mask for poorly correlated areas. Second, the unwrapped phase is stacked to reduce tropospheric and other short-wavelength noise. This combined processing enables us to recover the near-field (&SIM;200 m) slip signal across the fault due to shallow creep. Displacement maps from 60 interferograms reveal a diffuse secular strain buildup, punctuated by localized interseismic creep of 4-6 mm/yr line of sight (LOS, 12-18 mm/yr horizontal). With the exception of Durmid Hill, this entire segment of the southern San Andreas experienced right-lateral triggered slip of up to 10 cm during the 3.5-year period spanning the 1992 Landers earthquake. The deformation change following the 1999 Hector Mine earthquake was much smaller (<1 cm) and broader than for the Landers event. Profiles across the fault during the interseismic phase show peak-to-trough amplitude ranging from 15 to 25 mm/yr (horizontal component) and the minimum misfit models show a range of creeping/locking depth values that fit the data.

Keating, B, Cherkis NZ, Fell PW, Handschmacher D, Hey RN, Lazarewicz A, Naar DF, Perry RK, Sandwell D, Schwank DC, Vogt P, Zondek B.  1984.  Field-Tests of Seasat Bathymetric Detections. Marine Geophysical Researches. 7:69-71.   10.1007/bf00305411   AbstractWebsite

Knowledge of the locations and sizes of seamounts is of great importance in applications such as inertial navigation and ocean mining. The quality and density of bathymetry data in the equatorial regions and the southern hemisphere are, unifortunately, highly variable. Our present knowledge of bathymetry, and in particular of seamount locations and characteristics, is based upon ship surveys, which are both time-consuming and expensive. It is likely that a significant number of uncharted seamounts exist throughout the oceans, and remote-sensing techniques may be the most effective means of locating them.

G
Becker, JJ, Sandwell DT, Smith WHF, Braud J, Binder B, Depner J, Fabre D, Factor J, Ingalls S, Kim SH, Ladner R, Marks K, Nelson S, Pharaoh A, Trimmer R, Von Rosenberg J, Wallace G, Weatherall P.  2009.  Global Bathymetry and Elevation Data at 30 Arc Seconds Resolution: SRTM30_PLUS. Marine Geodesy. 32:355-371.   10.1080/01490410903297766   AbstractWebsite

A new 30-arc second resolution global topography/bathymetry grid (SRTM30_PLUS) has been developed from a wide variety of data sources. Land and ice topography comes from the SRTM30 and ICESat topography, respectively. Ocean bathymetry is based on a new satellite-gravity model where the gravity-to-topography ratio is calibrated using 298 million edited soundings. The main contribution of this study is the compilation and editing of the raw soundings, which come from NOAA, individual scientists, SIO, NGA, JAMSTEC, IFREMER, GEBCO, and NAVOCEANO. The gridded bathymetry is available for ftp download in the same format as the 33 tiles of SRTM30 topography. There are 33 matching tiles of source identification number to convey the provenance of every grid cell. The raw sounding data, converted to a simple common format, are also available for ftp download.

I
Zhang, SJ, Sandwell DT, Jin TY, Li DW.  2017.  Inversion of marine gravity anomalies over southeastern China seas from multi-satellite altimeter vertical deflections. Journal of Applied Geophysics. 137:128-137.   10.1016/j.jappgeo.2016.12.014   AbstractWebsite

The accuracy and resolution of marine gravity field derived from satellite altimetry mainly depends on the range precision and dense spatial distribution. This paper aims at modeling a regional marine gravity field with improved accuracy and higher resolution (1' x V') over Southeastern China Seas using additional data from CryoSat-2 as well as new data from AltiKa. Three approaches are used to enhance the precision level of satellite-derived gravity anomalies. Firstly we evaluate a suite of published retracking algorithms and find the two-step retracker is optimal for open ocean waveforms. Secondly, we evaluate the filtering and resampling procedure used to reduce the full 20 or 40 Hz data to a lower rate having lower noise. We adopt a uniform low-pass filter for all altimeter missions and resample at 5 Hz and then perform a second editing based on sea surface slope estimates from previous models. Thirdly, we selected WHU12 model to update the corrections provided in geophysical data record. We finally calculated the 1' x 1' marine gravity field model by using EGM2008 model as reference field during the remove/restore procedure. The root mean squares of the discrepancies between the new result and DTU10, DTU13, V23.1, EGM2008 are within the range of 1.8-3.9 mGal, while the verification with respect to shipboard gravity data shows that the accuracy of the new result reached a comparable level with DTU13 and was slightly superior to V23.1, DTU10 and EGM2008 models. Moreover, the new result has a 2 mGal better accuracy over open seas than coastal areas with shallow water depth. (C) 2016 Elsevier B.V. All rights reserved.

Garcia, ES, Sandwell DT, Luttrell KM.  2015.  An iterative spectral solution method for thin elastic plate flexure with variable rigidity. Geophysical Journal International. 200:1010-1026.   10.1093/gji/ggu449   AbstractWebsite

Thin plate flexure theory provides an accurate model for the response of the lithosphere to vertical loads on horizontal length scales ranging from tens to hundreds of kilometres. Examples include flexure at seamounts, fracture zones, sedimentary basins and subduction zones. When applying this theory to real world situations, most studies assume a locally uniform plate thickness to enable simple Fourier transform solutions. However, in cases where the amplitude of the flexure is prominent, such as subduction zones, or there are rapid variations in seafloor age, such as fracture zones, these models are inadequate. Here we present a computationally efficient algorithm for solving the thin plate flexure equation for non-uniform plate thickness and arbitrary vertical load. The iterative scheme takes advantage of the 2-D fast Fourier transform to perform calculations in both the spatial and spectral domains, resulting in an accurate and computationally efficient solution. We illustrate the accuracy of the method through comparisons with known analytic solutions. Finally, we present results from three simple models demonstrating the differences in trench outer rise flexure when 2-D variations in plate rigidity and applied bending moment are taken into account. Although we focus our analysis on ocean trench flexure, the method is applicable to other 2-D flexure problems having spatial rigidity variations such as seamount loading of a thermally eroded lithosphere or flexure across the continental-oceanic crust boundary.

L
Levitt, DA, Sandwell DT.  1995.  Lithospheric Bending at Subduction Zones Based on Depth Soundings and Satellite Gravity. Journal of Geophysical Research-Solid Earth. 100:379-400.   10.1029/94jb02468   AbstractWebsite

A global study of trench flexure was performed by simultaneously modeling 117 bathymetric profiles (original depth soundings) and satellite-derived gravity profiles. A thin, elastic plate flexure model was fit to each bathymetry/gravity profile by minimization of the L(1) norm. The six model parameters were regional depth, regional gravity, trench axis location, flexural wavelength, flexural amplitude, and lithospheric density. A regional tilt parameter was not required after correcting for age-related trend using a new high-resolution age map. Estimates of the density parameter confirm that most outer rises are uncompensated. We find that flexural wavelength is not an accurate estimate of plate thickness because of the high curvatures observed at a majority of trenches. As in previous studies, we find that the gravity data favor a longer-wavelength flexure than the bathymetry data. A joint topography-gravity modeling scheme and fit criteria are used to limit acceptable parameter values to models for which topography and gravity yield consistent results. Even after the elastic thicknesses are converted to mechanical thicknesses using the yield strength envelope model, residual scatter obscures the systematic increase of mechanical thickness with age; perhaps this reflects the combination of uncertainties inherent in estimating flexural wavelength, such as extreme inelastic bending and accumulated thermoelastic stress. The bending moment needed to support the trench and outer rise topography increases by a factor of 10 as lithospheric age increases from 20 to 150 Ma; this reflects the increase in saturation bending moment that the lithosphere can maintain. Using a stiff, dry-olivine theology, we find that the lithosphere of the GDH1 thermal model (Stein and Stein, 1992) is too hot and thin to maintain the observed bending moments. Moreover, the regional depth seaward of the oldest trenches (similar to 150 Ma) exceeds the GDH1 model depths by about 400 m.

Lindsey, EO, Fialko Y, Bock Y, Sandwell DT, Bilham R.  2014.  Localized and distributed creep along the southern San Andreas Fault. Journal of Geophysical Research-Solid Earth. 119:7909-7922.   10.1002/2014jb011275   AbstractWebsite

We investigate the spatial pattern of surface creep and off-fault deformation along the southern segment of the San Andreas Fault using a combination of multiple interferometric synthetic aperture radar viewing geometries and survey-mode GPS occupations of a dense array crossing the fault. Radar observations from Envisat during the period 2003-2010 were used to separate the pattern of horizontal and vertical motion, providing a high-resolution image of uplift and shallow creep along the fault trace. The data reveal pervasive shallow creep along the southernmost 50 km of the fault. Creep is localized on a well-defined fault trace only in the Mecca Hills and Durmid Hill areas, while elsewhere creep appears to be distributed over a 1-2 km wide zone surrounding the fault. The degree of strain localization is correlated with variations in the local fault strike. Using a two-dimensional boundary element model, we show that stresses resulting from slip on a curved fault can promote or inhibit inelastic failure within the fault zone in a pattern matching the observations. The occurrence of shallow, localized interseismic fault creep within mature fault zones may thus be partly controlled by the local fault geometry and normal stress, with implications for models of fault zone evolution, shallow coseismic slip deficit, and geologic estimates of long-term slip rates. Key PointsShallow creep is pervasive along the southernmost 50 km of the San Andreas FaultCreep is localized only along transpressional fault segmentsIn transtensional areas, creep is distributed over a 1-2 km wide fault zone

M
Levitt, DA, Sandwell DT.  1996.  Modal depth anomalies from multibeam bathymetry: Is there a south Pacific superswell? Earth and Planetary Science Letters. 139:1-16.   10.1016/0012-821x(95)00247-a   AbstractWebsite

A region west of the southern East Pacific Rise (SEPR), between the Marquesas and Austral Fracture Zones has previously been found to exhibit anomalous depth-age behavior, based on gridded bathymetry and single-beam soundings. Since gridded bathymetry has been shown to be unsuitable for some geophysical analysis and since the area is characterized by unusually robust volcanism, the magnitude and regional extent of depth anomalies over the young eastern flank of the so called 'South Pacific Superswell' are re-examined using a mode-seeking estimation procedure on data obtained from several recent multibeam surveys. The modal technique estimates a representative seafloor depth, based on the assumption that bathymetry from non-edifice and edifice-populated seafloor has a low and a high standard deviation, respectively. Flat seafloor depth values are concentrated in a few bins which correspond to the mode. This method estimates a representative seafloor value even on seafloor for which more than 90% of coverage is dominated by ridge and seamount clusters, where the mean and median estimates may be shallow by hundreds of meters. Where volcanism-related bias is moderate, the mode, mean and median estimates are close. Depth-age results indicate that there is only a small anomaly (< 200 m) over 15-35 Ma Pacific Plate seafloor with little age-dependent shallowing, suggesting that the lithosphere east of the main hot-spot locations on the 'superswell' is normal. An important implication is that, in sparsely surveyed areas, depths from ETOPO-5 are significantly different from true depths even at large scales (similar to 1000 km) and thus are unsuitable for investigations of anomalies associated with depth-age regressions. We find that seafloor slopes on conjugate profiles of the Pacific and Nazca Plates from 15 to 35 Ma are both slightly lower than normal, but are within the global range. Proximate to the SEPR, seafloor slopes are very low (218 m Myr(-1/2)) on the Pacific Plate (0-22 Ma) and slightly high (similar to 410 m Myr(-1/2)) on the Nazca Plate (0-8 Ma); slopes for older Pacific seafloor (22-37 Ma) are near normal (399 m Myr(-1/2)). Seafloor slopes are even lower north of the Marquesas Fracture Zone but are highly influenced by the Marquesas Swell. We find that the low subsidence rate on young Pacific seafloor cannot be explained by a local hot-spot or a small-scale convective model exclusively and a stretching/thickening model requires implausible crustal thickness variation (similar to 30%).

Luttrell, K, Sandwell D, Smith-Konter B, Bills B, Bock Y.  2007.  Modulation of the earthquake cycle at the southern San Andreas fault by lake loading. Journal of Geophysical Research-Solid Earth. 112   10.1029/2006jb004752   AbstractWebsite

Changes in the level of ancient Lake Cahuilla over the last 1500 years in the Salton Trough alter the state of stress by bending the lithosphere in response to the applied lake load and by varying the pore pressure magnitude within the crust. The recurrence interval of the lake is similar to the recurrence interval of rupture on the southern San Andreas and San Jacinto faults, both of which are partially covered by the lake at its highstand. Furthermore, four of the last five ruptures on the southern San Andreas fault have occurred near a time of substantial lake level change. We investigate the effect of Coulomb stress perturbations on local faults due to changing level of Lake Cahuilla to determine a possible role for the lake in affecting the timing of fault rupture. Coulomb stress is calculated with a three-dimensional model of an elastic plate overlying a viscoelastic half-space. Plate thickness and half-space relaxation time are adjusted to match observed vertical deformation since the last lake highstand. The lake cycle causes positive and negative Coulomb stress perturbations of 0.2-0.6 MPa on the southern San Andreas within the lake and 0.1-0.2 MPa on the southern San Andreas outside the lake. These Coulomb stress perturbations are comparable to stress magnitudes known to have triggered events at other faults along the North America-Pacific plate boundary.

N
Liu, CS, Sandwell DT, Curray JR.  1982.  The Negative Gravity-Field Over the 85-Degrees-E Ridge. Journal of Geophysical Research. 87:7673-7686.   10.1029/JB087iB09p07673   AbstractWebsite

An isopach map made from seismic reflection and refraction data in the Bay of Bengal shows two prominent N-S trending features in the basement topography. One is the northernmost portion of the Ninetyeast Ridge which is totally buried by sediments north of 10°N. The other buried ridge trends roughly N-S for 1400 km at 85°E to the latitude of Sri Lanka and then curves toward the west. It has basement relief up to 6 km. Two free-air gravity anomaly profiles across the region show a strong gravity low (∼−60 mGal) over the 85°E Ridge, while the Ninetyeast Ridge shows a gravity high. To understand the negative free-air gravity anomaly over the 85°E Ridge, we model the lithosphere as a thin elastic plate and calculate its flexural and gravitational response to an uneven sediment load. A plausible formation history for a buried ridge consists of at least two major episodes. The first is the formation of the ridge on a lithosphere with a flexural rigidity of D1. At some later time the ridge is buried by an influx of sediments, the lithosphere is cooler, and the flexural rigidity has increased to D2. The character of the gravity field depends primarily upon the initial and final values of flexural rigidity. These D1 and D2 values are varied to obtain good agreement between the model and observed gravity anomalies. Best fitting models have a 180 times increase in flexural rigidity between ridge formation and sediment burial. An approximate relationship between flexural rigidity and crustal age shows that the 85°E Ridge was formed on relatively young lithosphere, 5–15 m.y. old and that it was buried when the lithosphere was 40–80 m.y. old.

O
Luttrell, K, Sandwell D.  2010.  Ocean loading effects on stress at near shore plate boundary fault systems. Journal of Geophysical Research-Solid Earth. 115   10.1029/2009jb006541   AbstractWebsite

Changes in eustatic sea level since the Last Glacial Maximum create a differential load across coastlines globally. The resulting plate bending in response to this load alters the state of stress within the lithosphere within a half flexural wavelength of the coast. We calculate the perturbation to the total stress tensor due to ocean loading in coastal regions. Our stress calculation is fully 3-D and makes use of a semianalytic model to efficiently calculate stresses within a thick elastic plate overlying a viscoelastic or fluid half-space. The 3-D stress perturbation is resolved into normal and shear stresses on plate boundary fault planes of known orientation so that Coulomb stress perturbations can be calculated. In the absence of complete paleoseismic indicators that span the time since the Last Glacial Maximum, we investigate the possibility that the seismic cycle of coastal plate boundary faults was affected by stress perturbations due to the change in sea level. Coulomb stress on onshore transform faults, such as the San Andreas and Alpine faults, is increased by up to 1-1.5 MPa, respectively, promoting failure primarily through a reduction in normal stress. These stress perturbations may perceptibly alter the seismic cycle of major plate boundary faults, but such effects are more likely to be observed on nearby secondary faults with a lower tectonic stress accumulation rate. In the specific instance of rapid sea level rise at the Black Sea, the seismic cycle of the nearby North Anatolian fault was likely significantly advanced.

P
Sandwell, DT.  2001.  Plate tectonics; a Martian view. Plate tectonics; an insider's history of the modern theory of the Earth. ( Oreskes N, Le Grand H, Eds.)., Boulder, CO, United States (USA): Westview Press, Boulder, CO AbstractWebsite
n/a
R
Xu, X, Tong X, Sandwell DT, Milliner CWD, Dolan JF, Hollingsworth J, Leprince S, Ayoub F.  2016.  Refining the shallow slip deficit. Geophysical Journal International. 204:1867-1886.   10.1093/gji/ggv563   Abstract

Geodetic slip inversions for three major (Mw > 7) strike-slip earthquakes (1992 Landers, 1999 Hector Mine and 2010 El Mayor–Cucapah) show a 15–60 per cent reduction in slip near the surface (depth < 2 km) relative to the slip at deeper depths (4–6 km). This significant difference between surface coseismic slip and slip at depth has been termed the shallow slip deficit (SSD). The large magnitude of this deficit has been an enigma since it cannot be explained by shallow creep during the interseismic period or by triggered slip from nearby earthquakes. One potential explanation for the SSD is that the previous geodetic inversions lack data coverage close to surface rupture such that the shallow portions of the slip models are poorly resolved and generally underestimated. In this study, we improve the static coseismic slip inversion for these three earthquakes, especially at shallow depths, by: (1) including data capturing the near-fault deformation from optical imagery and SAR azimuth offsets; (2) refining the interferometric synthetic aperture radar processing with non-boxcar phase filtering, model-dependent range corrections, more complete phase unwrapping by SNAPHU (Statistical Non-linear Approach for Phase Unwrapping) assuming a maximum discontinuity and an on-fault correlation mask; (3) using more detailed, geologically constrained fault geometries and (4) incorporating additional campaign global positioning system (GPS) data. The refined slip models result in much smaller SSDs of 3–19 per cent. We suspect that the remaining minor SSD for these earthquakes likely reflects a combination of our elastic model's inability to fully account for near-surface deformation, which will render our estimates of shallow slip minima, and potentially small amounts of interseismic fault creep or triggered slip, which could ‘make up’ a small percentages of the coseismic SSD during the interseismic period. Our results indicate that it is imperative that slip inversions include accurate measurements of near-fault surface deformation to reliably constrain spatial patterns of slip during major strike-slip earthquakes.

S
Luttrell, K, Sandwell D.  2006.  Strength of the lithosphere of the Galilean satellites. Icarus. 183:159-167.   10.1016/j.icarus.2006.01.015   AbstractWebsite

Several approaches have been used to estimate the ice shell thickness on Callisto, Ganymede, and Europa. Here we develop a method for placing a strict lower bound on the thickness of the strong part of the shell (lithosphere) using measurements of topography. The minimal assumptions are that the strength of faults in the brittle lithosphere is controlled by lithostatic pressure according to Byerlee's law and the shell has relatively uniform density and thickness. Under these conditions, the topography of the ice provides a direct measure of the bending moment in the lithosphere. This topographic bending moment Must be less than the saturation bending moment of the yield strength envelope derived front Byerlee's law. The model predicts that the topographic amplitude spectrum decreases as the square of the topographic wavelength. This explains why Europa is rugged at shorter wavelengths ( similar to 10 km) but extremely smooth, and perhaps conforming to an equipotential Surface, at longer wavelengths ( > 100 km). Previously compiled data on impact crater depth and diameter [Schenk, P.M., 2002. Nature 417, 419-421] on Europa show good agreement with the spectral decrease predicted by the model and require a lithosphere thicker than 2.5 km. A more realistic model, including a ductile lower lithosphere. requires a thickness greater than 3.5 km. Future measurements of topography in the 10-100 km wavelength hand will provide tight constraints on lithospheric strength. (c) 2006 Elsevier Inc. All riahts reserved.

Xu, XH, Ward LA, Jiang JL, Smith-Konter B, Tymofyeyeva E, Lindsey EO, Sylvester AG, Sandwell DT.  2018.  Surface creep rate of the southern San Andreas Fault modulated by stress perturbations from nearby large events. Geophysical Research Letters. 45:10259-10268.   10.1029/2018gl080137   AbstractWebsite

A major challenge for understanding the physics of shallow fault creep has been to observe and model the long-term effect of stress changes on creep rate. Here we investigate the surface creep along the southern San Andreas fault (SSAF) using data from interferometric synthetic aperture radar spanning over 25 years (ERS 1992-1999, ENVISAT 2003-2010, and Sentinel-1 2014-present). The main result of this analysis is that the average surface creep rate increased after the Landers event and then decreased by a factor of 2-7 over the past few decades. We consider quasi-static and dynamic Coulomb stress changes on the SSAF due to these three major events. From our analysis, the elevated creep rates after the Landers can only be explained by static stress changes, indicating that even in the presence of dynamically triggered creep, static stress changes may have a long-lasting effect on SSAF creep rates. Plain Language Summary There are two significant conclusions from this study. First, we analyzed 25 years of InSAR measurements over the Southern San Andreas Fault system to document a major increase in the average creep rate following the 1992 Mw 7.3 Landers Earthquake which is then followed by creep rate reductions after the 1999 Mw 7.1 Hector Mine Earthquake and the 2010 Mw 7.2 El Major Cucapah Earthquake. Second, we attribute all these creep rate changes to the Coulomb stress variations from these three major Earthquakes. The dynamic Coulomb stress changes are similar for all three events, contributing to triggered creep on the SSAF. In contrast, the static Coulomb stress changes on the SSAF are positive after the Landers and negative after the Hector Mine and El Major Cucapah, coinciding with the higher average creep rate after the Landers and lower rates after the other two events. An implication of this study is that small but steady Coulomb stress changes have a larger impact on shallow creep than the larger dynamic stress changes associated with passing seismic waves. These results illuminate the significance of time scale-dependent complexity of shallow fault creep and how these behaviors are communicated by stress perturbations from regional earthquakes.

T
Royer, J-Y, Gahagan LM, Lawver LA, Mayes CL, Nuernberg D, Sandwell DT, Scotese CR.  1990.  A tectonic chart for the Southern Ocean derived from Geosat altimetry data. AAPG Studies in Geology. 31( St. John B, Ed.).:89-99., Tulsa, OK, United States (USA): American Association of Petroleum Geologists, Tulsa, OK AbstractWebsite

Presented is a new tectonic fabric map of the southern ocean south of 45S, derived from Geosat altimeter profiles and published bathymetric charts and magnetic anomaly picks. The interpretation of the Geosat data is based on an analysis of the first derivative of the geoid profiles (i.e., vertical deflection profiles). To improve the accuracy and resolution of the vertical deflection profiles, 22 repeat cycles from the first year of the Geosat/Exact Repeat Mission (Geosat/ERM) were averaged. At wavelengths less than about 200 km, the vertical deflection is highly correlated with sea-floor topography and thus reveals major features in areas that were previously unsurveyed. The density of the Geosat data is greatest in the high latitudes where lineated bathymetric features such as fracture zones, spreading ridges, trenches, and rifted margins stand out. To construct the tectonic fabric chart, the Geosat data are analyzed in combination with available shipboard bathymetric data and magnetic anomaly identifications. (Auth.)

Gahagan, LM, Scotese CR, Royer JY, Sandwell DT, Winn JK, Tomlins RL, Ross MI, Newman JS, Muller RD, Mayes CL, Lawver LA, Heubeck CE.  1988.  Tectonic Fabric Map of the Ocean Basins from Satellite Altimetry Data. Tectonophysics. 155:1-&.   10.1016/0040-1951(88)90258-2   AbstractWebsite

Satellite altimetry data provide a new source of information on the bathymetry of the ocean floor. The tectonic fabric of the oceans (i.e., the arrangement of fracture zones, ridges, volcanic plateaus and trenches) is revealed by changes in the horizontal gravity gradient as recorded by satellite altimetry measurements. SEASAT and GEOSAT altimetry data have been analyzed and a global map of the horizontal gravity gradient has been produced that can be used to identify a variety of marine tectonic features. The uniformity of the satellite coverage provides greater resolution and continuity than maps based solely on ship-track data. This map is also the first global map to incorporate the results of the GEOSAT mission, and as a result, new tectonic features are revealed at high southerly latitudes.This map permits the extension of many tectonic features well beyond what was previously known. For instance, various fracture zones, such as the Ascension, Tasman, and Udintsev fracture zones, can be extended much closer to adjacent coninental margins. The tectonic fabric map also reveals many features that have not been previously mapped. These features include extinct ridges, minor fracture zone lineations and seamounts. In several areas, especially across aseismic plateaus or along the margins of the continents, the map displays broad gravity anomalies whose origin may be related to basement structures.